Difference between revisions of "Huawei HG612 - Basic"
From kitz wiki
Burakkucat (talk | contribs) (→PTM connection) |
Burakkucat (talk | contribs) (→WAN settings) |
||
Line 30: | Line 30: | ||
[[File:Screenshot-12.png|800px|thumb|center]] | [[File:Screenshot-12.png|800px|thumb|center]] | ||
+ | |||
+ | The '''User name''' and '''Password''' to authenticate with your ISP should be entered on this page. | ||
+ | |||
+ | Ensure that the '''Wan connection''', both '''Port binding'''s (to be able to use both the ''LAN1'' & ''LAN2'' ports) and '''NAT''' are enabled. | ||
=== LAN settings === | === LAN settings === |
Revision as of 23:14, 16 July 2012
Contents
Basic configuration
DSL configuration
The default configuration is for All to be selected. With that setting each mode will be tested, in turn, starting from VDSL2 and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.
We see ADSL2 selected, in the above image, forcing that mode only to be used.
ATM connection
Here a typical PPPoA VCMUX encapsulated connection is configured, with a Virtual Path Identifier (VPI) of 0 and a Virtual Circuit Identifier (VCI) of 38.
PTM connection
Here, all existing configuration parameters may be deleted.
WAN settings
The User name and Password to authenticate with your ISP should be entered on this page.
Ensure that the Wan connection, both Port bindings (to be able to use both the LAN1 & LAN2 ports) and NAT are enabled.
LAN settings