Huawei HG612 - Basic
From kitz wiki
Contents
Basic configuration
DSL configuration
The default configuration is for All to be selected. With that setting each mode will be tested, in turn, starting from VDSL2 and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.
We see ADSL2 selected, in the above image, forcing that mode only to be used.
ATM connection
Here a typical PPPoA VCMUX encapsulated connection is configured, with a Virtual Path Identifier (VPI) of 0 and a Virtual Circuit Identifier (VCI) of 38.
PTM connection
Here, all existing configuration parameters may be cleared.
WAN settings
The User name and Password to authenticate with your ISP should be entered on this page.
Ensure that the Wan connection, both Port bindings (to be able to use both the LAN1 & LAN2 ports) and NAT are enabled.
LAN settings