kitz wiki - User contributions [en]

HG612 Telnet Access

2015-03-28T01:06:19Z

Burakkucat: Blanked the page

Huawei HG612

2015-03-28T01:03:21Z

Burakkucat: /* Huawei EchoLife HG612 Home Gateway */

== Huawei EchoLife HG612 Home Gateway ==

[[File:Hg612.gif|600px|center]]

The following pages show images from the device's GUI once it had been re-configured for use with an ADSL2 broadband service using PPPoA.

The necessary pre-requite is to flash the device with the unlocked firmware image, details of which can be found detailed here [1]. It is recommended that the device is not connected to the telephone line via its xDSL interface whilst the firmware image is being flashed and also while any significant configuration changes are being made.

* [[Huawei HG612 - Status|Huawei HG612 - Login and Status]]
* [[Huawei HG612 - Basic|Huawei HG612 - Basic Configuration]]
* Advanced Configuration
** [[Huawei HG612 - Routing/Firewall|Huawei HG612 - Routing and Firewall]]
** [[Huawei HG612 - Other advanced|Huawei HG612 - Other Advanced Configuration Pages]]
* [[Huawei_HG612_-_Maintenance|Huawei HG612 - Maintenance Page]]

----

[1] http://huaweihg612hacking.files.wordpress.com/2011/11/hg612_unlock_instructions_v1-3.pdf

Router Related Software

2014-06-25T22:06:48Z

Burakkucat: Eric's monitoring software is now known as DSLstats

Listed below are some free programs for monitoring and configuring routers:

* [[Routerstats|Routerstats and Routerstats-Lite]] - programs to monitor router noise margins, connection speeds, etc.
* [[DMT_Tool| DMT Tool]] - Router Interface which reveals information from your router and allows some configuration changes via a GUI.
* [http://rsux.plainroad.me.uk DSLstats] programs for Linux and Windows to monitor DSL connections using Broadcom-based routers.

Internal Wiring

2013-12-08T20:16:35Z

Burakkucat: /* The 1960s */

This page documents the internal wiring used by '''The GPO''', '''Post Office Telecommunications''', '''British Telecommunications''' and '''Openreach''' at domestic customers' premises.

Some fundamental background information --

A telephone "line" consists of a pair of wires and is, unsurprisingly, referred to as the "pair". Each of the two wires making up the pair have a name: the '''A-wire''' and the '''B-wire'''.

Relative to each other the '''A-wire''' is more positive than the '''B-wire'''. At the telephone exchange, the '''A-wire''' is connected to earth. The voltage present between the two wires is nominally 50 V DC.

Given two wires making up a pair without any markings, how are the '''A-''' and '''B-''' wires distinguished from each other? With a modern digital volt meter (DVM) set to an appropriate range, one could just apply the probes to the wires. The display will then either read ~ +50 V DC or ~ -50 V DC, thus allowing the wires of the pair to be correctly identified. Fifty years ago, when the average voltmeter was (typically) a moving coil instrument, it was bad practice to connect one the wrong way round -- simply because driving the movement against its end-stop could damage the device. The technique used was to earth the positive probe and test each of the wires, in turn, with the negative probe. That wire which showed ~ 50 V DC was therefore the '''B-wire''' and, logically, the other was the '''A-wire'''. Obviously, the "earthing of the positive probe technique" is equally valid with a modern-day DVM.

== The Late 1940s - Early 1950s ==

An outer sheath of either woven cotton or PVC. Two PVC insulated wires, twisted as a pair.

One wire's insulation was coloured '''black''' and the other wire's insulation was coloured '''blue'''.

== The 1960s ==

An outer sheath of either woven cotton or PVC. Four PVC insulated wires, twisted as a quad.

The individual wires were coloured '''blue''', '''brown''', '''green''' & '''orange''' and were connected as follows:

{| class="wikitable"
|-
! Colour
! Usage
! Note
|-
| Blue
| B-wire
|
|-
| Brown
| Bell Wire
| When extra bells or telephones were connected
|-
| Green
| Earth Wire
| For shared-service lines
|-
| Orange
| A-wire
|
|}

== The 1980s ==

An outer sheath of PVC. Six PVC insulated wires, twisted as three separate pairs. Each pair is referred by its major colour -- hence the '''green''', '''blue''' and '''orange''' pairs.

The '''green''' pair consists of a wire with green insulation & a white stripe and a wire with white insulation & a green stripe.<br />
The '''blue''' pair consists of a wire with blue insulation & a white stripe and a wire with white insulation & a blue stripe.<br />
The '''orange''' pair consists of a wire with orange insulation & a white stripe and a wire with white insulation & a orange stripe.<br />

When first introduced, co-incident with the current '''BT 431A''' plug & socket system, insulation displacing connectors ('''IDC'''s) and '''DIY''' wiring, all three pairs were connected as follows:

{| class="wikitable"
|-
! Colour
! IDC Number
! Usage
|-
| Green/White Stripe
| 1
| Signalling
|-
| Blue/White Stripe
| 2
| B-wire
|-
| Orange/White Stripe
| 3
| Bell Wire
|-
| White/Orange Stripe
| 4
| Earth Wire
|-
| White/Blue Stripe
| 5
| A-wire
|-
| White/Green Stripe
| 6
| Signalling
|}

== The Present Day ==

An outer sheath of PVC. Four PVC insulated wires, twisted as two separate pairs.

The individual wires are coloured '''blue''', '''brown''', '''green''' & '''orange''' and are connected as follows:

{| class="wikitable"
|-
! Colour
! IDC Number
! Usage
|-
| Blue
| 2
| B-wire
|-
| Brown
| 3
| Bell Wire
|-
| Orange
| 5
| A-wire
|}

The '''blue''' & '''orange''' wires constitute one twisted pair and the '''brown''' & '''green''' wires constitute the other.

-- [[User:Burakkucat|Burakkucat]] 21:43, 19 April 2012 (BST)

System software

2012-12-27T09:08:27Z

Burakkucat: /* Other System Tools */

Below are some links to useful system software applications.

__TOC__

== '''System Information''' ==

*[http://www.karenware.com/powertools/ptprofiler.asp Computer Profiler] Details about your CPU, memory, operating system, even your computer's power source, are all displayed
*[http://www.belarc.com/free_download.html Belarc Advisor] Detailed profile of your installed software and hardware.
*[http://www.karenware.com/powertools/ptlanmon.asp LAN Monitor] Monitor your computer's connections to other computers (on your LAN, and on the Internet). See real-time traffic statistics
*[http://majorgeeks.com/Motherboard_Monitor_d311.html Motherboard Monitor] Senses & displays information from your Mobo chip such as CPU, HDD, GFx and Mobo temperatures and fan speeds.
*[http://www.karenware.com/powertools/ptdirprn.asp Directory Printer] Print the names, and other information, of all folders and files on your computer
*[http://www.karenware.com/powertools/ptsnoop.asp Snooper] Keep track of the programs your computer runs, even when you're away.
*[http://www.karenware.com/powertools/ptwinwatch.asp Window Watcher] See the hidden programs running on your computer.
*[http://www.karenware.com/powertools/ptfonts.asp Font Explorer] See the fonts available on your computer
*[http://http://www.hwinfo.com/ HWiNFO™] HWiNFO™, HWiNFO32™ and HWiNFO64™ are professional hardware information and diagnostic tools supporting latest components, industry technologies and standards. Get in depth information on the hardware installed on your system.

== '''System Clean-up Tools''' ==

*[http://www.karenware.com/powertools/ptcookie.asp Cookie Viewer] View Web browser "Cookies" left by the web site's you've visited.
*[http://www.softpedia.com/get/Security/Secure-cleaning/CCleaner.shtml CCleaner] Removes unused and temporary files etc from your system.
*[http://www.timeatlas.com/tutorials/Ccleaner.htm CCleaner tutorial] Video tutorial for CCleaner.
*[http://www.piriform.com/mac CCleaner for Mac ] CCleaner for Mac OSX

*[http://singularlabs.com/software/ccenhancer/ CCEnhancer ] CCEnhancer is a third party application that extends support for @500 programs to the ever popular CCleaner program. (Note: this is NOT produced or supported by Piriform)

*[http://www.softpedia.com/get/Security/Secure-cleaning/ATF-Cleaner.shtml ATF Cleaner] Browser / temp files etc removal.

*[http://systemexplorer.net/ System Explorer] System Explorer is a small but exceptionally powerful utility.This tool provides detailed information about Tasks, Processes, Modules, Startups, IE Addons, Uninstallers, Windows, Services, Drivers, Connections and Opened Files. (Help centre and forum available)
*[http://www.karenware.com/powertools/ptpruner.asp Registry Pruner] Remove unneeded entries from Windows' Registry.
*[http://www.freedownloadscenter.com/Utilities/System_Analysis_Utilities/Free_Window_Registry_Repair.html Window Registry Repair] Free Window Registry Repair.
*[http://www.pctools.com/registry-mechanic/ Registry Mechanic] Time limited Registry Cleaner
*[http://www.softpedia.com/get/Tweak/Registry-Tweak/RegCleaner.shtml RegCleaner ] Free Registry Cleaner

*[http://www.teamcti.com/pview/prcview.htm PrcView] Process Viewer for Windows
*[http://technet.microsoft.com/en-gb/sysinternals/bb896653.aspx ProcessExplorer] Process Explorer from SysInternals
*[http://www.freewarefiles.com/Itty-Bitty-Process-Manager_program_19220.html Itty Bitty Process Manager] Process Manager from the author of HJT

*[http://technet.microsoft.com/en-us/sysinternals/bb897445.aspx RootkitRevealer] SysInternals Rootkit revealer for XP and WinServer 2003.

== '''Other System Tools''' ==

'''Utility'''

*[http://windows.microsoft.com/en-US/windows/downloads/windows-xp TweakUI] Access system settings that are not exposed in the Windows XP default user interface. (Part of the Power Toys suite)
*[http://technet.microsoft.com/en-gb/sysinternals/default.aspx Sysinternals] Site offering many Utility Tools for Windows.
*[http://www.softpedia.com/get/System/System-Miscellaneous/Windows-7-God-Mode-Tool.shtml GOD MODE ENABLER ] Simple enable/disable tool for Windows 7 GOD MODE, access all the hidden services,configuration pages and system information from a single page. (Sets GM icon on desktop.)
*[http://www.malwarebytes.org/products/startuplite StartUpLite ] StartUpLite removes unnecessary applications from start up, thus allowing Windows to start more quickly. Disussion and updates are found here *[http://forums.malwarebytes.org/index.php?showtopic=1248 StartUpLite Items List]

'''Backup'''

*[http://www.karenware.com/powertools/ptreplicator.asp Karens Replicator] Automatically backup files, directories, even entire drives!
*[http://www.educ.umu.se/~cobian/cobianbackup.htm Cobian Backup] Open Source backup tool
*[http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=15155 SyncToy] Synchronizes files and folders between locations
*[http://www.microsoft.com/download/en/details.aspx?id=17657 Robocopy] Free Command Line based replication. Part of Windows Server Resource Kit.

--[[User:Kitz|Kitz]] 11:24, 18 December 2011 (GMT)

Telnet

2012-07-27T23:05:28Z

Burakkucat: /* CLI commands */

__TOC__

== What is telnet? ==

In most cases, the main user interface to a router is its web interface which is accessed via a browser. In this interface the user can configure the router and obtain information from it. The frequently requested 'router stats' can usually be obtained here.

Many routers also provide a command-line interface in which commands can be typed to configure the router or to obtain information. Usually this interface will provide more comprehensive capabilities than the web interface, and should be considered an expert tool. Command line interfaces can also be used remotely, which can be very useful for administrators managing systems on behalf of others. There are different types of command-line interface, but the most commonly used one is [http://en.wikipedia.org/wiki/Telnet telnet.] This is not a secure protocol, so is not recommended for remote use, but is very convenient for local purposes.

== How to use telnet ==

Most operating systems including Windows, Mac OS X and Linux include a telnet program in their normal software setup (or it can be easily installed). To use this, open a command line window and type

telnet <IP address>

or

telnet <IP address> <port number>

The default telnet port is 23, but some routers may use a different port, and in these cases the second form of the command must be used.

The IP address is the same address as you enter in a browser to access the router's web interface; this will be something like 192.168.1.254 - the actual address should be shown in the router's manual, or you may find it on the [http://www.kitz.co.uk/adsl/frogstats.php Kitz router stats page.]

After entering the telnet command you will normally be asked for login details (user name and password) which are the same as those used when you access the web interface. If this is all entered correctly you will be logged into the router and will be presented with a > or # prompt. You can now type CLI commands into the router.

When you've finished your telnet session, it's good practice to log out again. The command to do this will probably be ''logout'' or ''exit'' .

== Telnet with Netgear routers ==
Netgear routers have a telnet interface, but it isn't enabled by default. To enable it, you first have to use the web interface to put the router into debug mode. To do this, point your browser at the hidden page http://192.168.0.1/setup.cgi?todo=debug . The router will respond with a plain page which says 'Debug enable' at the top. After this you can close the browser and telnet into the router as described above.

== CLI commands ==

It can often be difficult to find out what commands can be used here, because different routers have different command sets. Most manufacturers are rather secretive about this, and there are few published documents to help.

There is some information about CLI commands on some routers:

* [http://www.kitz.co.uk/routers/speedtouch585.htm Speedtouch 585 and several other Speedtouch routers]
* [http://www.kitz.co.uk/routers/voyager_2100_cli.htm Voyager 2100/2110/2091]
* [http://www.kitz.co.uk/routers/cli_commands.htm Solwise SAR110/130 and Voyager 205]
* [[Broadcom CLI|Routers which use Broadcom chipsets (BCM 6328/6338/6348/6358/6368)]]

--[[User:Roseway|Roseway]] 13:57, 27 December 2011 (GMT)

Huawei HG612

2012-07-27T23:00:00Z

Burakkucat: /* Huawei EchoLife HG612 Home Gateway */

== Huawei EchoLife HG612 Home Gateway ==

[[File:Hg612.gif|600px|center]]

The following pages show images from the device's GUI once it had been re-configured for use with an ADSL2 broadband service using PPPoA.

The necessary pre-requite is to flash the device with the unlocked firmware image, details of which can be found detailed here [1]. It is recommended that the device is not connected to the telephone line via its xDSL interface whilst the firmware image is being flashed and also while any significant configuration changes are being made.

* [[Status|Login and Status]]
* [[Basic|Basic Configuration]]
* Advanced Configuration
** [[Routing/Firewall|Routing and Firewall]]
** [[Other advanced|Other Advanced Configuration Pages]]
* [[Maintenance|Maintenance]]
* [[HG612_Telnet_Access|Telnet Access]]

----

[1] http://huaweihg612hacking.files.wordpress.com/2011/11/hg612_unlock_instructions_v1-3.pdf

Broadcom CLI

2012-07-27T22:57:48Z

Burakkucat: /* BCM 6368 chipset */

__TOC__

== Routers using Broadcom chipsets ==

Broadcom chipsets are widely used in ADSL routers, and most incorporate a very similar CLI command set, accessed through its telnet interface. It should be noted though that a number of ISP customised versions of these routers have the telnet interface disabled. This is an incomplete list of routers which have Broadcom chipsets and support telnet:

=== BCM 6328 chipset ===

* Billion 7700(N)

=== BCM 6338 chipset ===

* D-Link DSL-2540B, DSL-2542B
* Thomson/Speedtouch ST536, ST546, TG585v7

=== BCM 6348 chipset ===
* Netgear DG834GT, DG834v4, DG834Gv4, DG834PN, DGN2000
* D-Link DSL-2640B
* Thomson/Speedtouch ST585

=== BCM 6358 chipset ===

* Billion 7800(N)
* D-Link DSL-2740B
* Netgear DG834N, DGN2200

=== BCM 6368 chipset ===

* [[Huawei_HG612|Huawei Echolife HG612 Home Gateway]]

== CLI commands for Broadcom-based routers ==

All Broadcom-based ADSL routers have very similar CLI command sets. Listed below are a few of the more frequently used commands. In most cases, the CLI can be accessed via the [[Telnet|telnet interface.]]

=== Note regarding Netgear routers ===

Netgear routers use a slightly modified version of the Broadcom CLI command set. The command which is used most often is 'adsl' with various parameters, but in Netgear routers this command is replaced by 'adslctl'. On this page we will use 'adsl', but Netgear users will need to substitute 'adslctl'.

=== help command ===

* '''help''' - gives a list of the available commands
* '''one of those commands with no parameters''' - gives a synopsis of the usage of that command

=== adsl command ===

* '''adsl info --show''' - displays a brief set of router stats
* '''adsl info --stats''' - displays a full set of router stats including error rates over various periods
* '''adsl info --SNR''' - displays the current SNR for each ADSL tone
* '''adsl info --Bits''' - displays the bitloading for each ADSL tone
* '''adsl configure --snr N''' - sets the target signal to noise ratio margin to a new value and triggers a re-sync. The value of N determines by how much the target SNRM changes from the default value set at the DSLAM (or MSAN). The following table gives some approximate values:

{| border="1"
|Value of N
|Approx. change in target SNRM
|-
|65450
| -12 dB
|-
|65500
| -9 dB
|-
|1
| -5.5 dB
|-
|50
| -3 dB
|-
|100
|0 dB
|-
|150
| +3 dB
|-
|200
| +6 dB
|}

'''Warning'''

Be careful when making changes to the target SNRM, in particular when reducing it. The smaller the SNRM, the less stable the router is likely to be and if you make it too small the router may not be able to make a connection at all.

--[[User:Roseway|Roseway]] 13:58, 27 December 2011 (GMT)

Broadcom CLI

2012-07-27T22:54:31Z

Burakkucat: /* adsl command */

__TOC__

== Routers using Broadcom chipsets ==

Broadcom chipsets are widely used in ADSL routers, and most incorporate a very similar CLI command set, accessed through its telnet interface. It should be noted though that a number of ISP customised versions of these routers have the telnet interface disabled. This is an incomplete list of routers which have Broadcom chipsets and support telnet:

=== BCM 6328 chipset ===

* Billion 7700(N)

=== BCM 6338 chipset ===

* D-Link DSL-2540B, DSL-2542B
* Thomson/Speedtouch ST536, ST546, TG585v7

=== BCM 6348 chipset ===
* Netgear DG834GT, DG834v4, DG834Gv4, DG834PN, DGN2000
* D-Link DSL-2640B
* Thomson/Speedtouch ST585

=== BCM 6358 chipset ===

* Billion 7800(N)
* D-Link DSL-2740B
* Netgear DG834N, DGN2200

=== BCM 6368 chipset ===

* Huawei Echolife HG612 Home Gateway

== CLI commands for Broadcom-based routers ==

All Broadcom-based ADSL routers have very similar CLI command sets. Listed below are a few of the more frequently used commands. In most cases, the CLI can be accessed via the [[Telnet|telnet interface.]]

=== Note regarding Netgear routers ===

Netgear routers use a slightly modified version of the Broadcom CLI command set. The command which is used most often is 'adsl' with various parameters, but in Netgear routers this command is replaced by 'adslctl'. On this page we will use 'adsl', but Netgear users will need to substitute 'adslctl'.

=== help command ===

* '''help''' - gives a list of the available commands
* '''one of those commands with no parameters''' - gives a synopsis of the usage of that command

=== adsl command ===

* '''adsl info --show''' - displays a brief set of router stats
* '''adsl info --stats''' - displays a full set of router stats including error rates over various periods
* '''adsl info --SNR''' - displays the current SNR for each ADSL tone
* '''adsl info --Bits''' - displays the bitloading for each ADSL tone
* '''adsl configure --snr N''' - sets the target signal to noise ratio margin to a new value and triggers a re-sync. The value of N determines by how much the target SNRM changes from the default value set at the DSLAM (or MSAN). The following table gives some approximate values:

{| border="1"
|Value of N
|Approx. change in target SNRM
|-
|65450
| -12 dB
|-
|65500
| -9 dB
|-
|1
| -5.5 dB
|-
|50
| -3 dB
|-
|100
|0 dB
|-
|150
| +3 dB
|-
|200
| +6 dB
|}

'''Warning'''

Be careful when making changes to the target SNRM, in particular when reducing it. The smaller the SNRM, the less stable the router is likely to be and if you make it too small the router may not be able to make a connection at all.

--[[User:Roseway|Roseway]] 13:58, 27 December 2011 (GMT)

Broadcom CLI

2012-07-27T22:38:15Z

Burakkucat: /* Routers using Broadcom chipsets */

__TOC__

== Routers using Broadcom chipsets ==

Broadcom chipsets are widely used in ADSL routers, and most incorporate a very similar CLI command set, accessed through its telnet interface. It should be noted though that a number of ISP customised versions of these routers have the telnet interface disabled. This is an incomplete list of routers which have Broadcom chipsets and support telnet:

=== BCM 6328 chipset ===

* Billion 7700(N)

=== BCM 6338 chipset ===

* D-Link DSL-2540B, DSL-2542B
* Thomson/Speedtouch ST536, ST546, TG585v7

=== BCM 6348 chipset ===
* Netgear DG834GT, DG834v4, DG834Gv4, DG834PN, DGN2000
* D-Link DSL-2640B
* Thomson/Speedtouch ST585

=== BCM 6358 chipset ===

* Billion 7800(N)
* D-Link DSL-2740B
* Netgear DG834N, DGN2200

=== BCM 6368 chipset ===

* Huawei Echolife HG612 Home Gateway

== CLI commands for Broadcom-based routers ==

All Broadcom-based ADSL routers have very similar CLI command sets. Listed below are a few of the more frequently used commands. In most cases, the CLI can be accessed via the [[Telnet|telnet interface.]]

=== Note regarding Netgear routers ===

Netgear routers use a slightly modified version of the Broadcom CLI command set. The command which is used most often is 'adsl' with various parameters, but in Netgear routers this command is replaced by 'adslctl'. On this page we will use 'adsl', but Netgear users will need to substitute 'adslctl'.

=== help command ===

* '''help''' - gives a list of the available commands
* '''one of those commands with no parameters''' - gives a synopsis of the usage of that command

=== adsl command ===

* '''adsl info --show''' - displays a brief set of router stats
* '''adsl info --stats''' - displays a full set of router stats including error rates over various periods
* '''adsl info --SNR''' - displays the current SNR for each ADSL tone
* '''adsl info --Bits''' - displays the bitloading for each ADSL tone
* '''adsl configure --snr N''' - sets the target noise margin to a new value, and triggers a re-sync.

The value of N determines how much the target noise margin changes from the default value set in the exchange. The following table gives approximate values:

{| border="1"
|Value of N
|Approx change in target noise margin
|-
|65450
| -12 dB
|-
|65500
| -9 dB
|-
|1
| -5.5 dB
|-
|50
| -3 dB
|-
|100
|0 dB
|-
|150
| +3 dB
|-
|200
| +6 dB
|}

'''Warning'''

Be careful when making changes to the target noise margin, in particular when reducing it. The lower the noise margin, the less stable the router is likely to be, and if you go too far the router may not be able to make a connection at all.

--[[User:Roseway|Roseway]] 13:58, 27 December 2011 (GMT)

HG612 Telnet Access

2012-07-26T22:50:37Z

Burakkucat: Created page with "'''Telnet Access''' ''This is currently just a place-holder.'' --~~~~"

'''Telnet Access'''

''This is currently just a place-holder.''

--[[User:Burakkucat|Burakkucat]] 23:50, 26 July 2012 (BST)

Huawei HG612

2012-07-26T22:47:30Z

Burakkucat: /* Huawei EchoLife HG612 Home Gateway */

== Huawei EchoLife HG612 Home Gateway ==

[[File:Hg612.gif|600px|center]]

The following pages show images from the device's GUI once it had been re-configured for use with an ADSL2 broadband service using PPPoA.

The necessary pre-requite is to flash the device with the unlocked firmware image, details of which can be found detailed here [1]. It is recommended that the device is not connected to the telephone line via its xDSL interface whilst the firmware image is being flashed and also while any significant configuration changes are being made.

* [[Status|Login and Status]]
* [[Basic|Basic Configuration]]
* Advanced Configuration
** [[Routing/Firewall|Routing and Firewall]]
** [[Other advanced|Other Advanced Configuration Pages]]
* [[Maintenance|Maintenance]]

* [[HG612_Telnet_Access|Telnet Access]]

----

[1] http://huaweihg612hacking.files.wordpress.com/2011/11/hg612_unlock_instructions_v1-3.pdf

Huawei HG612 - Other advanced

2012-07-26T22:43:13Z

Burakkucat: /* QoS classification */

Huawei HG612 - Other advanced

2012-07-26T22:40:33Z

Burakkucat: /* QoS enable */

Huawei HG612 - Other advanced

2012-07-26T22:33:38Z

Burakkucat: /* SNTP */

Huawei HG612 - Routing/Firewall

2012-07-18T03:32:14Z

Burakkucat: /* ACL setup */

== Routing and firewall ==

=== Static routing ===

[[File:Screenshot-14.png|800px|thumb|center]]

=== Dynamic routing ===

[[File:Screenshot-15.png|800px|thumb|center]]

=== Firewall level ===

[[File:Screenshot-16.png|800px|thumb|center]]

From the drop-down menu, choose ''Firewall level:'' '''BT''', select the '''Delete level''' function and left-click on '''Submit'''.

Now choose ''Firewall level:'' '''Custom''', enter a descriptive name into blank field and left-click on '''Submit'''.

=== MAC filtering ===

[[File:Screenshot-17.png|800px|thumb|center]]

=== IP filtering ===

[[File:Screenshot-18.png|800px|thumb|center]]

Select the '''IP filtering''' option and define two rules. The first, ''From-LAN'', to allow all connections that originate on the LAN-side of the firewall access to the WAN-side. The second, ''From-WAN'', to disable all connections that originate on the WAN-side of the firewall access to the LAN-side. Left-click on '''Submit'''.

=== Application filtering ===

[[File:Screenshot-19.png|800px|thumb|center]]

=== DoS attack ===

[[File:Screenshot-20.png|800px|thumb|center]]

Select the '''DoS attack''' option and check '''ICMP flooding''', '''SYN flooding''' and '''ARP attack'''. Left-click on '''Submit'''.

=== ACL setup ===

[[File:Screenshot-21.png|800px|thumb|center]]

Select the '''ACL''' option and ensure that both service types '''HTTP''' and '''TELNET''' are enabled to allow access to the device from the LAN. Disable the service type '''ACS''' from the WAN to the device. Left-click on '''Submit'''.

[[Other advanced|Other advanced configuration pages]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Routing/Firewall

2012-07-18T03:31:38Z

Burakkucat: /* DoS attack */

== Routing and firewall ==

=== Static routing ===

[[File:Screenshot-14.png|800px|thumb|center]]

=== Dynamic routing ===

[[File:Screenshot-15.png|800px|thumb|center]]

=== Firewall level ===

[[File:Screenshot-16.png|800px|thumb|center]]

From the drop-down menu, choose ''Firewall level:'' '''BT''', select the '''Delete level''' function and left-click on '''Submit'''.

Now choose ''Firewall level:'' '''Custom''', enter a descriptive name into blank field and left-click on '''Submit'''.

=== MAC filtering ===

[[File:Screenshot-17.png|800px|thumb|center]]

=== IP filtering ===

[[File:Screenshot-18.png|800px|thumb|center]]

Select the '''IP filtering''' option and define two rules. The first, ''From-LAN'', to allow all connections that originate on the LAN-side of the firewall access to the WAN-side. The second, ''From-WAN'', to disable all connections that originate on the WAN-side of the firewall access to the LAN-side. Left-click on '''Submit'''.

=== Application filtering ===

[[File:Screenshot-19.png|800px|thumb|center]]

=== DoS attack ===

[[File:Screenshot-20.png|800px|thumb|center]]

Select the '''DoS attack''' option and check '''ICMP flooding''', '''SYN flooding''' and '''ARP attack'''. Left-click on '''Submit'''.

=== ACL setup ===

[[File:Screenshot-21.png|800px|thumb|center]]

[[Other advanced|Other advanced configuration pages]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Routing/Firewall

2012-07-18T03:30:59Z

Burakkucat: /* IP filtering */

== Routing and firewall ==

=== Static routing ===

[[File:Screenshot-14.png|800px|thumb|center]]

=== Dynamic routing ===

[[File:Screenshot-15.png|800px|thumb|center]]

=== Firewall level ===

[[File:Screenshot-16.png|800px|thumb|center]]

From the drop-down menu, choose ''Firewall level:'' '''BT''', select the '''Delete level''' function and left-click on '''Submit'''.

Now choose ''Firewall level:'' '''Custom''', enter a descriptive name into blank field and left-click on '''Submit'''.

=== MAC filtering ===

[[File:Screenshot-17.png|800px|thumb|center]]

=== IP filtering ===

[[File:Screenshot-18.png|800px|thumb|center]]

Select the '''IP filtering''' option and define two rules. The first, ''From-LAN'', to allow all connections that originate on the LAN-side of the firewall access to the WAN-side. The second, ''From-WAN'', to disable all connections that originate on the WAN-side of the firewall access to the LAN-side. Left-click on '''Submit'''.

=== Application filtering ===

[[File:Screenshot-19.png|800px|thumb|center]]

=== DoS attack ===

[[File:Screenshot-20.png|800px|thumb|center]]

=== ACL setup ===

[[File:Screenshot-21.png|800px|thumb|center]]

[[Other advanced|Other advanced configuration pages]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Routing/Firewall

2012-07-18T03:30:15Z

Burakkucat: /* Firewall level */

Huawei HG612 - Routing/Firewall

2012-07-18T03:29:33Z

Burakkucat: /* Firewall level */

== Routing and firewall ==

=== Static routing ===

[[File:Screenshot-14.png|800px|thumb|center]]

=== Dynamic routing ===

[[File:Screenshot-15.png|800px|thumb|center]]

=== Firewall level ===

[[File:Screenshot-16.png|800px|thumb|center]]

From the drop-down menu, choose ''Firewall level:'' '''BT''', select the '''Delete level''' function and left-click on '''Submit'''.

Now choose ''Firewall level:'' '''Custom''', enter a descriptive name into blank field and left-click on '''Submit'''.

Select the '''IP filtering''' option and define two rules. The first, ''From-LAN'', to allow all connections that originate on the LAN-side of the firewall access to the WAN-side. The second, ''From-WAN'', to disable all connections that originate on the WAN-side of the firewall access to the LAN-side. Left-click on '''Submit'''.

Select the '''DoS attack''' option and check '''ICMP flooding''', '''SYN flooding''' and '''ARP attack'''. Left-click on '''Submit'''.

Select the '''ACL''' option and ensure that both service types '''HTTP''' and '''TELNET''' are enabled to allow access to the device from the LAN. Disable the service type '''ACS''' from the WAN to the device. Left-click on '''Submit'''.

=== MAC filtering ===

[[File:Screenshot-17.png|800px|thumb|center]]

=== IP filtering ===

[[File:Screenshot-18.png|800px|thumb|center]]

=== Application filtering ===

[[File:Screenshot-19.png|800px|thumb|center]]

=== DoS attack ===

[[File:Screenshot-20.png|800px|thumb|center]]

=== ACL setup ===

[[File:Screenshot-21.png|800px|thumb|center]]

[[Other advanced|Other advanced configuration pages]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Basic

2012-07-18T02:52:59Z

Burakkucat: /* DSL configuration */

== Basic configuration ==

=== DSL configuration ===

[[File:Screenshot-09.png|800px|thumb|center]]

The default configuration is for '''All''' to be selected. With that setting each mode will be tested, in turn, starting from '''VDSL2''' and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.

We see, above, '''ADSL2''' selected, forcing that mode only to be used.

=== ATM connection ===

[[File:Screenshot-10.png|800px|thumb|center]]

Here a typical '''PPPoA''' '''VCMUX''' encapsulated connection is configured, with a Virtual Path Identifier ('''VPI''') of 0 and a Virtual Circuit Identifier ('''VCI''') of 38.

=== PTM connection ===

[[File:Screenshot-11.png|800px|thumb|center]]

Here all existing configuration parameters may be cleared.

=== WAN settings ===

[[File:Screenshot-12.png|800px|thumb|center]]

The '''User name''' and '''Password''' to authenticate with the ISP should be entered on this page.

Ensure that the '''Wan connection''', both '''Port binding'''s (to be able to use both of the LAN ports) and '''NAT''' are enabled.

=== LAN settings ===

[[File:Screenshot-13.png|800px|thumb|center]]

The default '''IP address''' of the device is '''192.168.1.1''', with '''255.255.255.0''' as the '''Subnet mask'''.

We see, above, that it has been reconfigured to use the '''192.168.1.254''' address. The default ''Subnet mask'' remains appropriate.

Enable the '''DHCP server''', specify the '''Start''' & '''End IP address'''es of the range that should be made available to clients and set the '''Lease duration''' to one day.

[[Routing/Firewall|Routing and firewall]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Status

2012-07-18T02:47:50Z

Burakkucat: /* Login page */

Huawei HG612

2012-07-18T02:46:51Z

Burakkucat: /* Huawei EchoLife HG612 Home Gateway */

== Huawei EchoLife HG612 Home Gateway ==

[[File:Hg612.gif|600px|center]]

The following pages show images from the device's GUI once it had been re-configured for use with an ADSL2 broadband service using PPPoA.

The necessary pre-requite is to flash the device with the unlocked firmware image, details of which can be found detailed here [1]. It is recommended that the device is not connected to the telephone line via its xDSL interface whilst the firmware image is being flashed and also while any significant configuration changes are being made.

* [[Status|Login and Status]]
* [[Basic|Basic Configuration]]
* Advanced Configuration
** [[Routing/Firewall|Routing and Firewall]]
** [[Other advanced|Other Advanced Configuration Pages]]
* [[Maintenance|Maintenance]]

* Telnet Access

----

[1] http://huaweihg612hacking.files.wordpress.com/2011/11/hg612_unlock_instructions_v1-3.pdf

Main Page

2012-07-17T00:05:28Z

Burakkucat: /* Kitz Wiki Content */

[[image:Kitz_logo.png|right]]

==Kitz Wiki==

Welcome to the Kitz Wiki which is intended as an extension to the main site at [http://www.kitz.co.uk www.kitz.co.uk].

The aim of the Kitz Wiki is to provide a searchable repository of useful broadband related articles and technical facts that can be added to or amended by our Wiki content team members.

For more info see [[Kitz wiki:About|About the Kitz Wiki]].

==Kitz Wiki Content==

At present only designated content team members can add new pages or edit information.

If you wish to comment on any of the contents in this wiki or have an article for submission, you can either contact the site owner or discuss this in our community [http://forum.kitz.co.uk Kitz Forums] (preferred method).

==List of Useful Pages in the Kitz Wiki==

*[[Router|Modem/Router Guides and Tutorials]]
*[[Technical|Technical Facts and Tutorials]]
*[[Telephony| Telephony]]
*[[Software|Free Software and Useful Applications]]
*[[Malware Prevention|Advice on Preventing Malware Infections]]
*[[Sandbox|Sandbox Page for Experimenting with Wiki Editing]]

==List of Useful Pages on the Main kitz.co.uk Site ==

* [http://www.kitz.co.uk/adsl/frogstats.php How to Get Your Line Stats from Your Modem/Router]

----

==Media Wiki ==

* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]

Kitz wiki:About

2012-07-17T00:03:55Z

Burakkucat: /* About kitz wiki content team */

__TOC__

== '''About kitz.co.uk''' ==

[http://www.kitz.co.uk kitz.co.uk] is one of the UK's largest adsl broadband resource & information sites.
This site contains a wealth of adsl information such as how adsl broadband works.
There's tips on choosing an ISP, and help comparing ISP prices. and ISP performance.

A large section of the site is devoted to self help diagnostics and what to do if you run into problems with your adsl connection, such as how to get adsl line stats from your router to understanding how such things as SNR and attenuation can affect your connection. There's also a vast array of tutorials and FAQs about broadband.

It is independently run, and unlike some broadband sites, we do not focus only on certain ISPs which pay commission. Although the site is well known and respected within the ISP industry, our position means that we are free to tell you 'as it is' and allows us to carry information on far more ISPs than most other broadband comparison sites.

== '''About the Kitz Wiki''' ==

Much of the pages on the main site are static and the content can only be changed by the site owner.

The aim of the Kitz Wiki is to provide a searchable repository of useful broadband related facts and articles that can be added to or amended by a much wider designated content team.

== '''About the Kitz Wiki Content Team''' ==

The Kitz Wiki Content Team comprises of trusted members of our community at [http://www.forum.kitz.co.uk Kitz Forums].

Content Team volunteers are respected members who often have a good understanding of broadband or other technical backgrounds.

Kitz wiki:About

2012-07-17T00:02:24Z

Burakkucat: /* About kitz wiki */

__TOC__

== '''About kitz.co.uk''' ==

[http://www.kitz.co.uk kitz.co.uk] is one of the UK's largest adsl broadband resource & information sites.
This site contains a wealth of adsl information such as how adsl broadband works.
There's tips on choosing an ISP, and help comparing ISP prices. and ISP performance.

A large section of the site is devoted to self help diagnostics and what to do if you run into problems with your adsl connection, such as how to get adsl line stats from your router to understanding how such things as SNR and attenuation can affect your connection. There's also a vast array of tutorials and FAQs about broadband.

It is independently run, and unlike some broadband sites, we do not focus only on certain ISPs which pay commission. Although the site is well known and respected within the ISP industry, our position means that we are free to tell you 'as it is' and allows us to carry information on far more ISPs than most other broadband comparison sites.

== '''About the Kitz Wiki''' ==

Much of the pages on the main site are static and the content can only be changed by the site owner.

The aim of the Kitz Wiki is to provide a searchable repository of useful broadband related facts and articles that can be added to or amended by a much wider designated content team.

== '''About kitz wiki content team''' ==

The kitz wiki content team comprises of trusted members of our community at [http://www.forum.kitz.co.uk kitz forums].

Content Team volunteers are respected members who often have a good understanding of broadband or other technical background.

Main Page

2012-07-17T00:00:04Z

Burakkucat: /* List of Useful Pages on the Main kitz.co.uk Site */

[[image:Kitz_logo.png|right]]

==Kitz Wiki==

Welcome to the Kitz Wiki which is intended as an extension to the main site at [http://www.kitz.co.uk www.kitz.co.uk].

The aim of the Kitz Wiki is to provide a searchable repository of useful broadband related articles and technical facts that can be added to or amended by our Wiki content team members.

For more info see [[Kitz wiki:About|About the Kitz Wiki]].

==Kitz Wiki Content==

At present only designated content team members can add new pages or edit information.

If you wish to comment on any of the contents in this wiki or have an article for submission, you can either contact the site owner or discuss this on our community [http://forum.kitz.co.uk Kitz Forums] (preferred method).

==List of Useful Pages in the Kitz Wiki==

*[[Router|Modem/Router Guides and Tutorials]]
*[[Technical|Technical Facts and Tutorials]]
*[[Telephony| Telephony]]
*[[Software|Free Software and Useful Applications]]
*[[Malware Prevention|Advice on Preventing Malware Infections]]
*[[Sandbox|Sandbox Page for Experimenting with Wiki Editing]]

==List of Useful Pages on the Main kitz.co.uk Site ==

* [http://www.kitz.co.uk/adsl/frogstats.php How to Get Your Line Stats from Your Modem/Router]

----

==Media Wiki ==

* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]

Main Page

2012-07-16T23:58:47Z

Burakkucat: /* List of useful pages on kitz.co.uk main site */

[[image:Kitz_logo.png|right]]

==Kitz Wiki==

Welcome to the Kitz Wiki which is intended as an extension to the main site at [http://www.kitz.co.uk www.kitz.co.uk].

The aim of the Kitz Wiki is to provide a searchable repository of useful broadband related articles and technical facts that can be added to or amended by our Wiki content team members.

For more info see [[Kitz wiki:About|About the Kitz Wiki]].

==Kitz Wiki Content==

At present only designated content team members can add new pages or edit information.

If you wish to comment on any of the contents in this wiki or have an article for submission, you can either contact the site owner or discuss this on our community [http://forum.kitz.co.uk Kitz Forums] (preferred method).

==List of Useful Pages in the Kitz Wiki==

*[[Router|Modem/Router Guides and Tutorials]]
*[[Technical|Technical Facts and Tutorials]]
*[[Telephony| Telephony]]
*[[Software|Free Software and Useful Applications]]
*[[Malware Prevention|Advice on Preventing Malware Infections]]
*[[Sandbox|Sandbox Page for Experimenting with Wiki Editing]]

==List of Useful Pages on the Main kitz.co.uk Site ==

* [http://www.kitz.co.uk/adsl/frogstats.php How to get your line stats from your router]

----

==Media Wiki ==

* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]

Main Page

2012-07-16T23:58:04Z

Burakkucat: /* List of useful pages in kitz wiki */

[[image:Kitz_logo.png|right]]

==Kitz Wiki==

Welcome to the Kitz Wiki which is intended as an extension to the main site at [http://www.kitz.co.uk www.kitz.co.uk].

The aim of the Kitz Wiki is to provide a searchable repository of useful broadband related articles and technical facts that can be added to or amended by our Wiki content team members.

For more info see [[Kitz wiki:About|About the Kitz Wiki]].

==Kitz Wiki Content==

At present only designated content team members can add new pages or edit information.

If you wish to comment on any of the contents in this wiki or have an article for submission, you can either contact the site owner or discuss this on our community [http://forum.kitz.co.uk Kitz Forums] (preferred method).

==List of Useful Pages in the Kitz Wiki==

*[[Router|Modem/Router Guides and Tutorials]]
*[[Technical|Technical Facts and Tutorials]]
*[[Telephony| Telephony]]
*[[Software|Free Software and Useful Applications]]
*[[Malware Prevention|Advice on Preventing Malware Infections]]
*[[Sandbox|Sandbox Page for Experimenting with Wiki Editing]]

==List of useful pages on kitz.co.uk main site ==

* [http://www.kitz.co.uk/adsl/frogstats.php How to get your line stats from your router]

----

==Media Wiki ==

* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]

Main Page

2012-07-16T23:57:13Z

Burakkucat: /* List of useful pages on kitz.co.uk main site */

[[image:Kitz_logo.png|right]]

==Kitz Wiki==

Welcome to the Kitz Wiki which is intended as an extension to the main site at [http://www.kitz.co.uk www.kitz.co.uk].

The aim of the Kitz Wiki is to provide a searchable repository of useful broadband related articles and technical facts that can be added to or amended by our Wiki content team members.

For more info see [[Kitz wiki:About|About the Kitz Wiki]].

==Kitz Wiki Content==

At present only designated content team members can add new pages or edit information.

If you wish to comment on any of the contents in this wiki or have an article for submission, you can either contact the site owner or discuss this on our community [http://forum.kitz.co.uk Kitz Forums] (preferred method).

==List of useful pages in kitz wiki==

*[[Router|Modem/Router Guides and Tutorials]]
*[[Technical|Technical Facts and Tutorials]]
*[[Telephony| Telephony]]
*[[Software|Free Software and Useful Applications]]
*[[Malware Prevention|Advice on Preventing Malware Infections]]
*[[Sandbox|Sandbox Page for Experimenting with Wiki Editing]]

==List of useful pages on kitz.co.uk main site ==

* [http://www.kitz.co.uk/adsl/frogstats.php How to get your line stats from your router]

----

==Media Wiki ==

* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]

Main Page

2012-07-16T23:56:40Z

Burakkucat: /* List of useful pages on kitz.co.uk main site */

[[image:Kitz_logo.png|right]]

==Kitz Wiki==

Welcome to the Kitz Wiki which is intended as an extension to the main site at [http://www.kitz.co.uk www.kitz.co.uk].

The aim of the Kitz Wiki is to provide a searchable repository of useful broadband related articles and technical facts that can be added to or amended by our Wiki content team members.

For more info see [[Kitz wiki:About|About the Kitz Wiki]].

==Kitz Wiki Content==

At present only designated content team members can add new pages or edit information.

If you wish to comment on any of the contents in this wiki or have an article for submission, you can either contact the site owner or discuss this on our community [http://forum.kitz.co.uk Kitz Forums] (preferred method).

==List of useful pages in kitz wiki==

*[[Router|Modem/Router Guides and Tutorials]]
*[[Technical|Technical Facts and Tutorials]]
*[[Telephony| Telephony]]
*[[Software|Free Software and Useful Applications]]
*[[Malware Prevention|Advice on Preventing Malware Infections]]
*[[Sandbox|Sandbox Page for Experimenting with Wiki Editing]]

==List of useful pages on kitz.co.uk main site ==

* [http://www.kitz.co.uk/adsl/frogstats.php How to get your line stats from your router]

----

==Media Wiki ==

* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]

Main Page

2012-07-16T23:55:33Z

Burakkucat: /* Kitz Wiki */

[[image:Kitz_logo.png|right]]

==Kitz Wiki==

Welcome to the Kitz Wiki which is intended as an extension to the main site at [http://www.kitz.co.uk www.kitz.co.uk].

The aim of the Kitz Wiki is to provide a searchable repository of useful broadband related articles and technical facts that can be added to or amended by our Wiki content team members.

For more info see [[Kitz wiki:About|About the Kitz Wiki]].

==Kitz Wiki Content==

At present only designated content team members can add new pages or edit information.

If you wish to comment on any of the contents in this wiki or have an article for submission, you can either contact the site owner or discuss this on our community [http://forum.kitz.co.uk Kitz Forums] (preferred method).

==List of useful pages in kitz wiki==

*[[Router|Modem/Router Guides and Tutorials]]
*[[Technical|Technical Facts and Tutorials]]
*[[Telephony| Telephony]]
*[[Software|Free Software and Useful Applications]]
*[[Malware Prevention|Advice on Preventing Malware Infections]]
*[[Sandbox|Sandbox Page for Experimenting with Wiki Editing]]

==List of useful pages on kitz.co.uk main site ==

[http://www.kitz.co.uk/adsl/frogstats.php How to get your line stats from your router]

----

==Media Wiki ==

* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]

Main Page

2012-07-16T23:52:49Z

Burakkucat: /* Kitz Wiki Content */

[[image:Kitz_logo.png|right]]

==Kitz Wiki==

Welcome to the kitz wiki which is intended as an extension to the main site at [http://www.kitz.co.uk www.kitz.co.uk].

The aim of the kitz wiki is to provide a searchable repository of useful broadband related articles and technical facts that can be added to or amended by our wiki content team members.

For more info see [[Kitz wiki:About]]

==Kitz Wiki Content==

At present only designated content team members can add new pages or edit information.

If you wish to comment on any of the contents in this wiki or have an article for submission, you can either contact the site owner or discuss this on our community [http://forum.kitz.co.uk Kitz Forums] (preferred method).

==List of useful pages in kitz wiki==

*[[Router|Modem/Router Guides and Tutorials]]
*[[Technical|Technical Facts and Tutorials]]
*[[Telephony| Telephony]]
*[[Software|Free Software and Useful Applications]]
*[[Malware Prevention|Advice on Preventing Malware Infections]]
*[[Sandbox|Sandbox Page for Experimenting with Wiki Editing]]

==List of useful pages on kitz.co.uk main site ==

[http://www.kitz.co.uk/adsl/frogstats.php How to get your line stats from your router]

----

==Media Wiki ==

* [http://www.mediawiki.org/wiki/Manual:FAQ MediaWiki FAQ]

Main Page

2012-07-16T23:51:46Z

Burakkucat: /* List of useful pages in kitz wiki */

Router

2012-07-16T23:49:20Z

Burakkucat: /* Modem/Router Guides and Reviews */

__TOC__

=='''Modems and Routers'''==

The equipment which connects to and forwards data from the Internet on to your home network.

Modems convert digital signals from your PC/Network into analog signals that can be transmitted over telephone cable in the local loop, and vice versa. In order to serve more than one computer, a modem needs to be connected to a router.

ADSL routers contain a modem combined with a router (and usually a network switch) in one piece of equipment.

=='''Modem Guides'''==

Listed below is a selection of modem specific guides or tutorials held on the Kitz wiki:

* [[Huawei HG612|Huawei HG612 Home Gateway]]

=='''Modem/Router Guides and Reviews'''==

Listed below is a selection of modem/router specific reviews, guides or tutorials held on the Kitz wiki:

* [[Billion_7800N|Billion BiPac 7800N]]
* [[D_Link_DSL-2740B|D Link DSL-2740B]]
* [[Netgear_DG834GT|Netgear DG834GT]]
* [[Telnet|How to use a Modem/Router's Telnet Interface]]

The main site at kitz.co.uk also holds several tutorials on the following modem/routers:

*[http://www.kitz.co.uk/routers/2wire_2700.htm 2wire 2700HG* Overview]
*[http://www.kitz.co.uk/routers/2wire_2700_HGV.htm 2wire 2700HGV Review]
*[http://www.kitz.co.uk/routers/2wire_2700_HGB.htm How to reset the 2Wire 2700HG* router]
*[http://www.kitz.co.uk/routers/voyager205.htm BT Voyager 205]
*[http://www.kitz.co.uk/routers/voyager_2100_cli.htm BT Voyager 2100/2110/2091]
*[http://www.kitz.co.uk/routers/belkin_commands.htm Belkin Router Hidden commands]
*[http://www.kitz.co.uk/routers/DSL-G624T.htm DLink DSL G624T Tracert]
*[http://www.kitz.co.uk/routers/SmartAX.htm Huawei SmartAX MT882]
*[http://www.kitz.co.uk/routers/netgeardg834_interleaving.htm Netgear DG834/DG834G]
*[http://www.kitz.co.uk/routers/dg834GT_targetsnr.htm Netgear DG834/DG834GT v4]
*[http://www.kitz.co.uk/isp/sky_connection.htm Sky Routers]
*[http://www.kitz.co.uk/routers/sar.htm Solwise SAR 110 130]
*[http://www.kitz.co.uk/routers/speedtouch585.htm Speedtouch CLI commands]

Router

2012-07-16T23:47:47Z

Burakkucat: /* Modem/Router Guides and Reviews */

__TOC__

=='''Modems and Routers'''==

The equipment which connects to and forwards data from the Internet on to your home network.

Modems convert digital signals from your PC/Network into analog signals that can be transmitted over telephone cable in the local loop, and vice versa. In order to serve more than one computer, a modem needs to be connected to a router.

ADSL routers contain a modem combined with a router (and usually a network switch) in one piece of equipment.

=='''Modem Guides'''==

Listed below is a selection of modem specific guides or tutorials held on the Kitz wiki:

* [[Huawei HG612|Huawei HG612 Home Gateway]]

=='''Modem/Router Guides and Reviews'''==

Listed below is a selection of modem/router specific reviews, guides or tutorials held in Kitz wiki:

* [[Billion_7800N|Billion BiPac 7800N]]
* [[D_Link_DSL-2740B|D Link DSL-2740B]]
* [[Netgear_DG834GT|Netgear DG834GT]]
* [[Telnet|How to use a Modem/Router's Telnet Interface]]

The main site at kitz.co.uk also holds several tutorials on the following modem/routers:

*[http://www.kitz.co.uk/routers/2wire_2700.htm 2wire 2700HG* Overview]
*[http://www.kitz.co.uk/routers/2wire_2700_HGV.htm 2wire 2700HGV Review]
*[http://www.kitz.co.uk/routers/2wire_2700_HGB.htm How to reset the 2Wire 2700HG* router]
*[http://www.kitz.co.uk/routers/voyager205.htm BT Voyager 205]
*[http://www.kitz.co.uk/routers/voyager_2100_cli.htm BT Voyager 2100/2110/2091]
*[http://www.kitz.co.uk/routers/belkin_commands.htm Belkin Router Hidden commands]
*[http://www.kitz.co.uk/routers/DSL-G624T.htm DLink DSL G624T Tracert]
*[http://www.kitz.co.uk/routers/SmartAX.htm Huawei SmartAX MT882]
*[http://www.kitz.co.uk/routers/netgeardg834_interleaving.htm Netgear DG834/DG834G]
*[http://www.kitz.co.uk/routers/dg834GT_targetsnr.htm Netgear DG834/DG834GT v4]
*[http://www.kitz.co.uk/isp/sky_connection.htm Sky Routers]
*[http://www.kitz.co.uk/routers/sar.htm Solwise SAR 110 130]
*[http://www.kitz.co.uk/routers/speedtouch585.htm Speedtouch CLI commands]

Router

2012-07-16T23:45:49Z

Burakkucat: /* Modem/Router Guides and Reviews */

__TOC__

=='''Modems and Routers'''==

The equipment which connects to and forwards data from the Internet on to your home network.

Modems convert digital signals from your PC/Network into analog signals that can be transmitted over telephone cable in the local loop, and vice versa. In order to serve more than one computer, a modem needs to be connected to a router.

ADSL routers contain a modem combined with a router (and usually a network switch) in one piece of equipment.

=='''Modem Guides'''==

Listed below is a selection of modem specific guides or tutorials held on the Kitz wiki:

* [[Huawei HG612|Huawei HG612 Home Gateway]]

=='''Modem/Router Guides and Reviews'''==

Listed below is a selection of modem/router specific reviews, guides or tutorials held in Kitz wiki:

* [[Billion_7800N|Billion BiPac 7800N]]
* [[D_Link_DSL-2740B|D Link DSL-2740B]]
* [[Netgear_DG834GT|Netgear DG834GT]]
* [[Telnet|How to use a Modem/Router's Telnet Interface]]

The main site at kitz.co.uk also holds several tutorials on the following modem/routers:

*[http://www.kitz.co.uk/routers/2wire_2700.htm 2wire 2700HG* Overview]
*[http://www.kitz.co.uk/routers/2wire_2700_HGV.htm 2wire 2700HGV Review]
*[http://www.kitz.co.uk/routers/2wire_2700_HGB.htm How to reset the 2Wire 2700HG* router]
*[http://www.kitz.co.uk/routers/voyager205.htm BT Voyager 205]
*[http://www.kitz.co.uk/routers/voyager_2100_cli.htm BT Voyager 2100/2110/2091]
*[http://www.kitz.co.uk/routers/belkin_commands.htm Belkin Router Hidden commands]
*[http://www.kitz.co.uk/routers/DSL-G624T.htm DLink DSL G624T Tracert]
*[http://www.kitz.co.uk/routers/SmartAX.htm Huawei SmartAX MT882]
*[http://www.kitz.co.uk/routers/netgeardg834_interleaving.htm Netgear DG834/DG834G]
*[http://www.kitz.co.uk/routers/dg834GT_targetsnr.htm Netgear DG834/DG834GT v4]
*[http://www.kitz.co.uk/isp/sky_connection.htm Sky Routers]
*[http://www.kitz.co.uk/routers/sar.htm Solwise SAR 110 130]
*[http://www.kitz.co.uk/routers/speedtouch585.htm Speedtouch CLI commands]

Router

2012-07-16T23:45:27Z

Burakkucat: /* Router Guides and Reviews */

__TOC__

=='''Modems and Routers'''==

The equipment which connects to and forwards data from the Internet on to your home network.

Modems convert digital signals from your PC/Network into analog signals that can be transmitted over telephone cable in the local loop, and vice versa. In order to serve more than one computer, a modem needs to be connected to a router.

ADSL routers contain a modem combined with a router (and usually a network switch) in one piece of equipment.

=='''Modem Guides'''==

Listed below is a selection of modem specific guides or tutorials held on the Kitz wiki:

* [[Huawei HG612|Huawei HG612 Home Gateway]]

=='''Modem/Router Guides and Reviews'''==

Listed below is a selection of modem/router specific reviews, guides or tutorials held in Kitz wiki:

* [[Billion_7800N|Billion BiPac 7800N]]
* [[D_Link_DSL-2740B|D Link DSL-2740B]]
* [[Netgear_DG834GT|Netgear DG834GT]]
* [[Telnet|How to use a Modem/Router's Telnet Interface]]

The main site at kitz.co.uk also holds several tutorials on the following modem/routers:

*[http://www.kitz.co.uk/routers/2wire_2700.htm 2wire 2700HG* Overview]
*[http://www.kitz.co.uk/routers/2wire_2700_HGV.htm 2wire 2700HGV Review]
*[http://www.kitz.co.uk/routers/2wire_2700_HGB.htm How to reset the 2Wire 2700HG* router]
*[http://www.kitz.co.uk/routers/voyager205.htm BT Voyager 205]
*[http://www.kitz.co.uk/routers/voyager_2100_cli.htm BT Voyager 2100/2110/2091]
*[http://www.kitz.co.uk/routers/belkin_commands.htm Belkin Router Hidden commands]
*[http://www.kitz.co.uk/routers/DSL-G624T.htm DLink DSL G624T Tracert]
*[http://www.kitz.co.uk/routers/SmartAX.htm Huawei SmartAX MT882]
*[http://www.kitz.co.uk/routers/netgeardg834_interleaving.htm Netgear DG834/DG834G]
*[http://www.kitz.co.uk/routers/dg834GT_targetsnr.htm Netgear DG834/DG834GT v4]
*[http://www.kitz.co.uk/isp/sky_connection.htm Sky Routers]
*[http://www.kitz.co.uk/routers/sar.htm Solwise SAR 110 130]
*[http://www.kitz.co.uk/routers/speedtouch585.htm Speedtouch CLI commands]

Router

2012-07-16T23:42:11Z

Burakkucat: /* Modem Guides */

__TOC__

=='''Modems and Routers'''==

The equipment which connects to and forwards data from the Internet on to your home network.

Modems convert digital signals from your PC/Network into analog signals that can be transmitted over telephone cable in the local loop, and vice versa. In order to serve more than one computer, a modem needs to be connected to a router.

ADSL routers contain a modem combined with a router (and usually a network switch) in one piece of equipment.

=='''Modem Guides'''==

Listed below is a selection of modem specific guides or tutorials held on the Kitz wiki:

* [[Huawei HG612|Huawei HG612 Home Gateway]]

=='''Router Guides and Reviews'''==

Listed below is a selection of router specific reviews, guides or tutorials held in Kitz wiki:

* [[Billion_7800N|Billion BiPac 7800N]]
* [[D_Link_DSL-2740B|D Link DSL-2740B]]
* [[Netgear_DG834GT|Netgear DG834GT]]
* [[Telnet|How to use a router's telnet interface]]

The main site at kitz.co.uk also holds several tutorials on the following routers:

*[http://www.kitz.co.uk/routers/2wire_2700.htm 2wire 2700HG* Overview]
*[http://www.kitz.co.uk/routers/2wire_2700_HGV.htm 2wire 2700HGV Review]
*[http://www.kitz.co.uk/routers/2wire_2700_HGB.htm How to reset the 2Wire 2700HG* router]
*[http://www.kitz.co.uk/routers/voyager205.htm BT Voyager 205]
*[http://www.kitz.co.uk/routers/voyager_2100_cli.htm BT Voyager 2100/2110/2091]
*[http://www.kitz.co.uk/routers/belkin_commands.htm Belkin Router Hidden commands]
*[http://www.kitz.co.uk/routers/DSL-G624T.htm DLink DSL G624T Tracert]
*[http://www.kitz.co.uk/routers/SmartAX.htm Huawei SmartAX MT882]
*[http://www.kitz.co.uk/routers/netgeardg834_interleaving.htm Netgear DG834/DG834G]
*[http://www.kitz.co.uk/routers/dg834GT_targetsnr.htm Netgear DG834/DG834GT v4]
*[http://www.kitz.co.uk/isp/sky_connection.htm Sky Routers]
*[http://www.kitz.co.uk/routers/sar.htm Solwise SAR 110 130]
*[http://www.kitz.co.uk/routers/speedtouch585.htm Speedtouch CLI commands]

Huawei HG612 - Basic

2012-07-16T23:37:41Z

Burakkucat: /* WAN settings */

== Basic configuration ==

=== DSL configuration ===

[[File:Screenshot-09.png|800px|thumb|center]]

The default configuration is for '''All''' to be selected. With that setting each mode will be tested, in turn, starting from '''VDSL2''' and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.

We see '''ADSL2''' selected, in the above image, forcing that mode only to be used.

=== ATM connection ===

[[File:Screenshot-10.png|800px|thumb|center]]

Here a typical '''PPPoA''' '''VCMUX''' encapsulated connection is configured, with a Virtual Path Identifier ('''VPI''') of 0 and a Virtual Circuit Identifier ('''VCI''') of 38.

=== PTM connection ===

[[File:Screenshot-11.png|800px|thumb|center]]

Here all existing configuration parameters may be cleared.

=== WAN settings ===

[[File:Screenshot-12.png|800px|thumb|center]]

The '''User name''' and '''Password''' to authenticate with the ISP should be entered on this page.

Ensure that the '''Wan connection''', both '''Port binding'''s (to be able to use both of the LAN ports) and '''NAT''' are enabled.

=== LAN settings ===

[[File:Screenshot-13.png|800px|thumb|center]]

The default '''IP address''' of the device is '''192.168.1.1''', with '''255.255.255.0''' as the '''Subnet mask'''.

We see, above, that it has been reconfigured to use the '''192.168.1.254''' address. The default ''Subnet mask'' remains appropriate.

Enable the '''DHCP server''', specify the '''Start''' & '''End IP address'''es of the range that should be made available to clients and set the '''Lease duration''' to one day.

[[Routing/Firewall|Routing and firewall]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Basic

2012-07-16T23:36:27Z

Burakkucat: /* WAN settings */

== Basic configuration ==

=== DSL configuration ===

[[File:Screenshot-09.png|800px|thumb|center]]

The default configuration is for '''All''' to be selected. With that setting each mode will be tested, in turn, starting from '''VDSL2''' and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.

We see '''ADSL2''' selected, in the above image, forcing that mode only to be used.

=== ATM connection ===

[[File:Screenshot-10.png|800px|thumb|center]]

Here a typical '''PPPoA''' '''VCMUX''' encapsulated connection is configured, with a Virtual Path Identifier ('''VPI''') of 0 and a Virtual Circuit Identifier ('''VCI''') of 38.

=== PTM connection ===

[[File:Screenshot-11.png|800px|thumb|center]]

Here all existing configuration parameters may be cleared.

=== WAN settings ===

[[File:Screenshot-12.png|800px|thumb|center]]

The '''User name''' and '''Password''' to authenticate with the ISP should be entered on this page.

Ensure that the '''Wan connection''', both '''Port binding'''s (to be able to use both the ''LAN1'' & ''LAN2'' ports) and '''NAT''' are enabled.

=== LAN settings ===

[[File:Screenshot-13.png|800px|thumb|center]]

The default '''IP address''' of the device is '''192.168.1.1''', with '''255.255.255.0''' as the '''Subnet mask'''.

We see, above, that it has been reconfigured to use the '''192.168.1.254''' address. The default ''Subnet mask'' remains appropriate.

Enable the '''DHCP server''', specify the '''Start''' & '''End IP address'''es of the range that should be made available to clients and set the '''Lease duration''' to one day.

[[Routing/Firewall|Routing and firewall]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Basic

2012-07-16T23:35:56Z

Burakkucat: /* PTM connection */

== Basic configuration ==

=== DSL configuration ===

[[File:Screenshot-09.png|800px|thumb|center]]

The default configuration is for '''All''' to be selected. With that setting each mode will be tested, in turn, starting from '''VDSL2''' and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.

We see '''ADSL2''' selected, in the above image, forcing that mode only to be used.

=== ATM connection ===

[[File:Screenshot-10.png|800px|thumb|center]]

Here a typical '''PPPoA''' '''VCMUX''' encapsulated connection is configured, with a Virtual Path Identifier ('''VPI''') of 0 and a Virtual Circuit Identifier ('''VCI''') of 38.

=== PTM connection ===

[[File:Screenshot-11.png|800px|thumb|center]]

Here all existing configuration parameters may be cleared.

=== WAN settings ===

[[File:Screenshot-12.png|800px|thumb|center]]

The '''User name''' and '''Password''' to authenticate with your ISP should be entered on this page.

Ensure that the '''Wan connection''', both '''Port binding'''s (to be able to use both the ''LAN1'' & ''LAN2'' ports) and '''NAT''' are enabled.

=== LAN settings ===

[[File:Screenshot-13.png|800px|thumb|center]]

The default '''IP address''' of the device is '''192.168.1.1''', with '''255.255.255.0''' as the '''Subnet mask'''.

We see, above, that it has been reconfigured to use the '''192.168.1.254''' address. The default ''Subnet mask'' remains appropriate.

Enable the '''DHCP server''', specify the '''Start''' & '''End IP address'''es of the range that should be made available to clients and set the '''Lease duration''' to one day.

[[Routing/Firewall|Routing and firewall]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Status

2012-07-16T23:33:30Z

Burakkucat: /* Login page */

Huawei HG612

2012-07-16T23:32:09Z

Burakkucat: /* Huawei EchoLife HG612 Home Gateway */

== Huawei EchoLife HG612 Home Gateway ==

[[File:Hg612.gif|600px|center]]

The following pages show images from the device's GUI once it had been re-configured for use with a PPPoA ADSL2 broadband service.

The necessary pre-requite is to flash the device with the unlocked firmware image, which can be found detailed here [1]. It is recommended that the device is disconnected from the xDSL service whilst the firmware image is being flashed and also while any significant configuration changes are being made.

* [[Status|Login and Status]]
* [[Basic|Basic Configuration]]
* Advanced Configuration
** [[Routing/Firewall|Routing and Firewall]]
** [[Other advanced|Other Advanced Configuration Pages]]
* [[Maintenance|Maintenance]]

* Telnet Access

----

[1] http://huaweihg612hacking.files.wordpress.com/2011/11/hg612_unlock_instructions_v1-3.pdf

Huawei HG612

2012-07-16T23:31:11Z

Burakkucat: /* Huawei EchoLife HG612 Modem */

== Huawei EchoLife HG612 Home Gateway ==

[[File:Hg612.gif|600px|center]]

The following pages show images from the device's GUI once it had been re-configured for use with an ADSL2 broadband service.

The necessary pre-requite is to flash the device with the unlocked firmware image, which can be found detailed here [1]. It is recommended that the device is disconnected from the xDSL service whilst the firmware image is being flashed and also while any significant configuration changes are being made.

* [[Status|Login and Status]]
* [[Basic|Basic Configuration]]
* Advanced Configuration
** [[Routing/Firewall|Routing and Firewall]]
** [[Other advanced|Other Advanced Configuration Pages]]
* [[Maintenance|Maintenance]]

* Telnet Access

----

[1] http://huaweihg612hacking.files.wordpress.com/2011/11/hg612_unlock_instructions_v1-3.pdf

Huawei HG612 - Basic

2012-07-16T23:29:01Z

Burakkucat: /* LAN settings */

== Basic configuration ==

=== DSL configuration ===

[[File:Screenshot-09.png|800px|thumb|center]]

The default configuration is for '''All''' to be selected. With that setting each mode will be tested, in turn, starting from '''VDSL2''' and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.

We see '''ADSL2''' selected, in the above image, forcing that mode only to be used.

=== ATM connection ===

[[File:Screenshot-10.png|800px|thumb|center]]

Here a typical '''PPPoA''' '''VCMUX''' encapsulated connection is configured, with a Virtual Path Identifier ('''VPI''') of 0 and a Virtual Circuit Identifier ('''VCI''') of 38.

=== PTM connection ===

[[File:Screenshot-11.png|800px|thumb|center]]

Here, all existing configuration parameters may be cleared.

=== WAN settings ===

[[File:Screenshot-12.png|800px|thumb|center]]

The '''User name''' and '''Password''' to authenticate with your ISP should be entered on this page.

Ensure that the '''Wan connection''', both '''Port binding'''s (to be able to use both the ''LAN1'' & ''LAN2'' ports) and '''NAT''' are enabled.

=== LAN settings ===

[[File:Screenshot-13.png|800px|thumb|center]]

The default '''IP address''' of the device is '''192.168.1.1''', with '''255.255.255.0''' as the '''Subnet mask'''.

We see, above, that it has been reconfigured to use the '''192.168.1.254''' address. The default ''Subnet mask'' remains appropriate.

Enable the '''DHCP server''', specify the '''Start''' & '''End IP address'''es of the range that should be made available to clients and set the '''Lease duration''' to one day.

[[Routing/Firewall|Routing and firewall]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Basic

2012-07-16T23:15:07Z

Burakkucat: /* PTM connection */

== Basic configuration ==

=== DSL configuration ===

[[File:Screenshot-09.png|800px|thumb|center]]

The default configuration is for '''All''' to be selected. With that setting each mode will be tested, in turn, starting from '''VDSL2''' and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.

We see '''ADSL2''' selected, in the above image, forcing that mode only to be used.

=== ATM connection ===

[[File:Screenshot-10.png|800px|thumb|center]]

Here a typical '''PPPoA''' '''VCMUX''' encapsulated connection is configured, with a Virtual Path Identifier ('''VPI''') of 0 and a Virtual Circuit Identifier ('''VCI''') of 38.

=== PTM connection ===

[[File:Screenshot-11.png|800px|thumb|center]]

Here, all existing configuration parameters may be cleared.

=== WAN settings ===

[[File:Screenshot-12.png|800px|thumb|center]]

The '''User name''' and '''Password''' to authenticate with your ISP should be entered on this page.

Ensure that the '''Wan connection''', both '''Port binding'''s (to be able to use both the ''LAN1'' & ''LAN2'' ports) and '''NAT''' are enabled.

=== LAN settings ===

[[File:Screenshot-13.png|800px|thumb|center]]

[[Routing/Firewall|Routing and firewall]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Basic

2012-07-16T23:14:41Z

Burakkucat: /* WAN settings */

== Basic configuration ==

=== DSL configuration ===

[[File:Screenshot-09.png|800px|thumb|center]]

The default configuration is for '''All''' to be selected. With that setting each mode will be tested, in turn, starting from '''VDSL2''' and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.

We see '''ADSL2''' selected, in the above image, forcing that mode only to be used.

=== ATM connection ===

[[File:Screenshot-10.png|800px|thumb|center]]

Here a typical '''PPPoA''' '''VCMUX''' encapsulated connection is configured, with a Virtual Path Identifier ('''VPI''') of 0 and a Virtual Circuit Identifier ('''VCI''') of 38.

=== PTM connection ===

[[File:Screenshot-11.png|800px|thumb|center]]

Here, all existing configuration parameters may be deleted.

=== WAN settings ===

[[File:Screenshot-12.png|800px|thumb|center]]

The '''User name''' and '''Password''' to authenticate with your ISP should be entered on this page.

Ensure that the '''Wan connection''', both '''Port binding'''s (to be able to use both the ''LAN1'' & ''LAN2'' ports) and '''NAT''' are enabled.

=== LAN settings ===

[[File:Screenshot-13.png|800px|thumb|center]]

[[Routing/Firewall|Routing and firewall]]

[[Huawei HG612|Back to Huawei HG612 main page]]

Huawei HG612 - Basic

2012-07-16T23:05:32Z

Burakkucat: /* PTM connection */

Huawei HG612 - Basic

2012-07-16T23:03:14Z

Burakkucat: /* ATM connection */