Kitz ADSL Broadband Information
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
 

Difference between revisions of "Billion 7800N"

From kitz wiki
Jump to: navigation, search
(Description and brief guide to the Billion 7800N ADSL router)
 
(More text added)
Line 1: Line 1:
'''Billion 7800N'''
+
==Billion BiPac 7800N==
  
Text to be added
+
This ADSL router has 4 normal gigabit ethernet ports and an EWAN port which enables it to be used as a cable router. It has a wireless-N interface and a robust SPI firewall.
 +
 
 +
It uses a Broadcom BCM6358 ADSL chip, and the firmware supports some features which are not available in lesser routers:-
 +
 
 +
- PhyR impulse noise protection
 +
 
 +
- QOS
 +
 
 +
- IPv6 support
 +
 
 +
- The target noise margin can be adjusted in the web interface, using a hidden page
 +
 
 +
- Comprehensive information and control via the telnet interface
 +
 
 +
'''PhyR impulse noise protection'''
 +
 
 +
PhyR (pronounced 'fire') is a unique Broadcom technology which improves the router's ability to hold a connection under conditions of high impulse noise. Unfortunately it depends on the DSLAM/MSAN in the exchange also being a Broadcom model, so is not generally useful to every user.
 +
 
 +
'''QOS'''
 +
 
 +
(Description to be added)
 +
 
 +
'''IPv6 support'''
 +
 
 +
Full support for the IPv6 protocol is provided in firmware version 1.06d and later. At the time of writing (Nov 2011) the latest version is 1.06e: http://www.billion.uk.com/firmware/78xx/7800N/UKBillion7800n_1.06e.zip
 +
 
 +
'''Tweaking the target noise margin'''
 +
 
 +
From the web interface, go to the hidden page http://192.168.1.254/snr.cgi . Enter the required value in the box and click Save. The router will drop the connection and reconnect with the new noise margin. The values which you enter increase or decrease the current target noise margin (set in the exchange) by the following approximate amounts:
 +
 
 +
200 = +6dB
 +
150 = +3dB
 +
100 = +0dB
 +
50 = -3dB
 +
25 = -4.5db
 +
1 = -5.5dB

Revision as of 16:04, 1 November 2011

Billion BiPac 7800N

This ADSL router has 4 normal gigabit ethernet ports and an EWAN port which enables it to be used as a cable router. It has a wireless-N interface and a robust SPI firewall.

It uses a Broadcom BCM6358 ADSL chip, and the firmware supports some features which are not available in lesser routers:-

- PhyR impulse noise protection

- QOS

- IPv6 support

- The target noise margin can be adjusted in the web interface, using a hidden page

- Comprehensive information and control via the telnet interface

PhyR impulse noise protection

PhyR (pronounced 'fire') is a unique Broadcom technology which improves the router's ability to hold a connection under conditions of high impulse noise. Unfortunately it depends on the DSLAM/MSAN in the exchange also being a Broadcom model, so is not generally useful to every user.

QOS

(Description to be added)

IPv6 support

Full support for the IPv6 protocol is provided in firmware version 1.06d and later. At the time of writing (Nov 2011) the latest version is 1.06e: http://www.billion.uk.com/firmware/78xx/7800N/UKBillion7800n_1.06e.zip

Tweaking the target noise margin

From the web interface, go to the hidden page http://192.168.1.254/snr.cgi . Enter the required value in the box and click Save. The router will drop the connection and reconnect with the new noise margin. The values which you enter increase or decrease the current target noise margin (set in the exchange) by the following approximate amounts:

200 = +6dB 150 = +3dB 100 = +0dB 50 = -3dB 25 = -4.5db 1 = -5.5dB