Kitz ADSL Broadband Information
Home Broadband ISPs Tech Routers Wiki Forum
   Compare ISP   Rate your ISP

Broadcom CLI

From kitz wiki
Revision as of 07:38, 24 December 2011 by Roseway (talk | contribs) (CLI commands for Broadcom-based routers)
Jump to: navigation, search

This page is incomplete

Routers using Broadcom chipsets

Broadcom chipsets are widely used in ADSL routers, and most incorporate a very similar CLI command set, accessed through its telnet interface. It should be noted though that a number of ISP customised versions of these routers have the telnet interface disabled. This is an incomplete list of routers which have Broadcom chipsets and support telnet:

BCM 6338 chipset

  • D-Link DSL-2540B

BCM 6348 chipset

  • Netgear DG834GT, DG834v4, DG834Gv4, DGN2000
  • D-Link DSL-2640B

BCM 6358 chipset

  • Billion 7700(N), 7800(N)
  • D-Link DSL-2740B
  • Netgear DGN2200

CLI commands for Broadcom-based routers

All Broadcom-based ADSL routers have very similar CLI command sets. Listed below are a few of the more frequently used commands.

Note regarding Netgear routers

Netgear routers use a slightly modified version of the Broadcom CLI command set. The command which is used most often is 'adsl' with various parameters, but in Netgear routers this command is replaced by 'adslctl'. On this page we will use 'adsl', but Netgear users will need to substitute 'adslctl'.

adsl command