Kitz ADSL Broadband Information
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
 

Difference between revisions of "Huawei HG612 - Basic"

From kitz wiki
Jump to: navigation, search
(LAN settings)
(PTM connection)
Line 24: Line 24:
  
  
Here, all existing configuration parameters may be cleared.
+
Here all existing configuration parameters may be cleared.
  
 
=== WAN settings ===
 
=== WAN settings ===

Revision as of 00:35, 17 July 2012

Basic configuration

DSL configuration

Screenshot-09.png


The default configuration is for All to be selected. With that setting each mode will be tested, in turn, starting from VDSL2 and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.

We see ADSL2 selected, in the above image, forcing that mode only to be used.

ATM connection

Screenshot-10.png


Here a typical PPPoA VCMUX encapsulated connection is configured, with a Virtual Path Identifier (VPI) of 0 and a Virtual Circuit Identifier (VCI) of 38.

PTM connection

Screenshot-11.png


Here all existing configuration parameters may be cleared.

WAN settings

Screenshot-12.png


The User name and Password to authenticate with your ISP should be entered on this page.

Ensure that the Wan connection, both Port bindings (to be able to use both the LAN1 & LAN2 ports) and NAT are enabled.

LAN settings

Screenshot-13.png


The default IP address of the device is 192.168.1.1, with 255.255.255.0 as the Subnet mask.

We see, above, that it has been reconfigured to use the 192.168.1.254 address. The default Subnet mask remains appropriate.

Enable the DHCP server, specify the Start & End IP addresses of the range that should be made available to clients and set the Lease duration to one day.


Routing and firewall

Back to Huawei HG612 main page