Kitz ADSL Broadband Information
Home Broadband ISPs Tech Routers Wiki Forum
   Compare ISP   Rate your ISP

Huawei HG612 - Basic

From kitz wiki
Revision as of 00:15, 17 July 2012 by Burakkucat (talk | contribs) (PTM connection)
Jump to: navigation, search

Basic configuration

DSL configuration


The default configuration is for All to be selected. With that setting each mode will be tested, in turn, starting from VDSL2 and will cease once a stable sync with the remote DSLAM (or MSAN) has been obtained.

We see ADSL2 selected, in the above image, forcing that mode only to be used.

ATM connection


Here a typical PPPoA VCMUX encapsulated connection is configured, with a Virtual Path Identifier (VPI) of 0 and a Virtual Circuit Identifier (VCI) of 38.

PTM connection


Here, all existing configuration parameters may be cleared.

WAN settings


The User name and Password to authenticate with your ISP should be entered on this page.

Ensure that the Wan connection, both Port bindings (to be able to use both the LAN1 & LAN2 ports) and NAT are enabled.

LAN settings


Routing and firewall

Back to Huawei HG612 main page