TD-W9980 QuickSetup
TP-Link TD-W9980 & TD-W9970 Web GUI
Below are screen shoots from the Web GUI for the TP-Link TD-W9980. The TD-W9970 is very similar.
This guide should help you set up your TP-Link TD-W9980 or TD-W9970 for FTTC. (BT Openreach Fibre in the UK)
Contents
TD-W9980 & TD-W9970 Quick Setup
Start
Page 1. Quick Setup - Start
Region and Time Zone
Page 2. Quick Setup - Region & Time Zone
Operation Mode
Page 3. Quick Setup - Operation Mode
Select ISP
Page 4. Quick Setup - Select ISP
The drop down box should contain various preconfigured UK ISPs. If your ISP is not listed chose 'Others'
Note: If the drop down box says ADSL_yourISP and you are setting up for VDSL - make sure you select 'others'
DSL
Page 5. Quick Setup - DSL
Select ADSL or VDSL.
For UK FTTC (BTOpenreach Fibre): Select VDSL. Tick "Enable Vlan ID". Enter 101 for the VID.
xDSL Connection Type
For UK FTTC (BTOpenreach Fibre): Select PPPoE
Page 6. Quick Setup - xDSL Connection Type
PPPoE
For UK FTTC (BTOpenreach Fibre): Enter your ISP Username and password details. Username will be in the format of yourname@yourISP.net/com
Page 7. Quick Setup - Wireless 2.4GHz
Wireless 2.4GHz
Page 8. Quick Setup - Wireless 2.4GHz
Wireless 5GHz
Page 9. Quick Setup - Wireless 5GHz
Confirm
Page 10. Quick Setup - Confirm
Check details and Click Save.