Kitz ADSL Broadband Information
Home Broadband ISPs Tech Routers Wiki Forum
 
     
   Compare ISP   Rate your ISP
 

Difference between revisions of "Huawei HG612"

From kitz wiki
Jump to: navigation, search
(Huawei EchoLife HG612 Home Gateway)
 
(5 intermediate revisions by 2 users not shown)
Line 8: Line 8:
 
The necessary pre-requite is to flash the device with the unlocked firmware image, details of which can be found detailed here [1]. It is recommended that the device is not connected to the telephone line via its xDSL interface whilst the firmware image is being flashed and also while any significant configuration changes are being made.
 
The necessary pre-requite is to flash the device with the unlocked firmware image, details of which can be found detailed here [1]. It is recommended that the device is not connected to the telephone line via its xDSL interface whilst the firmware image is being flashed and also while any significant configuration changes are being made.
  
* [[Status|Login and Status]]
+
* [[Huawei HG612 - Status|Huawei HG612 - Login and Status]]
* [[Basic|Basic Configuration]]
+
* [[Huawei HG612 - Basic|Huawei HG612 - Basic Configuration]]
 
* Advanced Configuration
 
* Advanced Configuration
** [[Routing/Firewall|Routing and Firewall]]
+
** [[Huawei HG612 - Routing/Firewall|Huawei HG612 - Routing and Firewall]]
** [[Other advanced|Other Advanced Configuration Pages]]
+
** [[Huawei HG612 - Other advanced|Huawei HG612 - Other Advanced Configuration Pages]]
* [[Maintenance|Maintenance]]
+
* [[Huawei_HG612_-_Maintenance|Huawei HG612 - Maintenance Page]]
 
 
* [[HG612_Telnet_Access|Telnet Access]]
 
  
  
Line 21: Line 19:
  
  
[1] http://huaweihg612hacking.files.wordpress.com/2011/11/hg612_unlock_instructions_v1-3.pdf
+
[1] http://www.kitz.co.uk/routers/hg612hacking.htm

Latest revision as of 21:57, 5 August 2016

Huawei EchoLife HG612 Home Gateway

Hg612.gif


The following pages show images from the device's GUI once it had been re-configured for use with an ADSL2 broadband service using PPPoA.

The necessary pre-requite is to flash the device with the unlocked firmware image, details of which can be found detailed here [1]. It is recommended that the device is not connected to the telephone line via its xDSL interface whilst the firmware image is being flashed and also while any significant configuration changes are being made.




[1] http://www.kitz.co.uk/routers/hg612hacking.htm